HDD Calculator

UNITS OF MEASUREMENT

 

BORE SPECIFICATIONS

 
Soil Conditions
Bore Length feet

DescriptionDiameter (inches)Volume (gallons)
pilot hole 0
pre-ream #1 0
pre-ream #2 0
pre-ream #3 0
pre-ream #4 0
pre-ream #5 0
final ream/pullback 0
  Total: 0

DRILLING FLUIDS

 
Recycling Fluid  
Recycling Capacity gallons
Drilling Fluid
Additive
       
CLAY CUTTER™


OPTIONAL FIELDS

 
Project Name
Company Name
Project Location



IMPORTANT – If you are recycling fluid, you must enter a value in the Final Ream/Pullback box.

  

SUMMARY

Pilot Hole
Hole Diameter 0
Gallons per linear foot required 0.00
Total volume required for Pilot Hole 0 gallons
Total volume of drilling fluid required 0
SODA ASH
0.25 to 0.50 lbs per 100 gallons of freshwater
Total lbs needed: 0 to 0
Total 50 lb bags needed 1 to 1
HYDRAUL-EZ®
10 to 15 lbs per 100 gallons of freshwater
Total lbs needed: 0 to 0
Total 50 lb bags needed: 1 to 1
CLAY CUTTER™
14.00 ozs per 100 gallons of drilling fluid
Total ozs needed: 0
Total 5 gallon pails needed: 1
DRILL-TERGE™
2.00 to 3.00 qts per 100 gallons of drilling fluid
Total qts needed: 0 to 0
Total 5 gallon pails needed: 1 to 1
Mixing Order For Drilling Fluid Products
1. SODA ASH (add when filling water)
2. HYDRAUL-EZ®
3. CLAY CUTTER™ (after drilling fluid has completely yielded)
4. DRILL-TERGE™ (after polymer has been fully blended into the system)

Disclaimer: The above estimated calculations do not include loss of material to formation, washouts, improper mixing, etc. CETCO makes no warranty of any kind and accepts no responsibility for the results obtained through the application of this information.


CETCO