Waterstops and Expansion Joints

Waterstops with expansion capabilities that not only provide better seals, but can fill voids and seals cracks.

The broad product range and installation versatility of our waterproofing systems allow you to work with a single manufacturer to cover all of your waterproofing needs. From zero-lot property line construction to backfilled foundation walls to under slab and plaza deck application, CETCO has the waterproofing solution that fit your need.

 

The CXJ series expansion joints have a unique double-level flange design for high-movement capability.

The center gland geometric shape is purpose-designed for low strain during movement for optimal performance. The system consists of an extruded, thermoplastic, dual gland expansion joint seals with integrated side flanges that can be integrated with CETCO’s waterproofing systems to create a true single source waterproofing system.

 

    Featured Products

    200x147_Akwastop

    AKWASTOP
    A hydrophilic rubber waterstop, AKWASTOP swells up to 300% upon contact with water and provides a consistent seal along the entire installation. It prevents water infiltration through cast-in-place concrete construction joints subjected to continuous or intermittent hydrostatic pressure.
    READ MORE | TECHNICAL DATA SHEETS

    200x147_Akwaswell

    AKWASWELL
    A polyurethane-based caulk grade swelling paste, AKWASWELL is used primarily to seal rough surfaces in concrete construction joints. Swelling up to 500% of its initial volume when hydrated by water, it creates a positive seal and stops the flow of water through the joint and is suitable for low to moderate hydostatic pressure conditions.
    READ MORETECHNICAL DATA SHEETS

    200x147_CXJ-400

    CXJ-SERIES
    Used to waterproof structural concrete expansion joints for positive-side below grade foundation walls and under structural slabs, CXJ-200 and CXJ-400 consists of an extruded, thermoplastic, dual gland expansion joint seals with integrated side flanges. Movement at the joint is accommodated by the geometric shape of the double-cell, center gland configuration with two material layers to form the system.
    READ MORE  | TECHNICAL DATA SHEETS | TECHNICAL DATA SHEETS | TECHNICAL DATA SHEETS

    200x147_RevoFix

    REVOFIX
    REVO-FIX is a profiled expanded metal mesh strip designed for mechanically fixing WATERSTOP-RX and WATERSTOP-XP to cast-in-place concrete surfaces. Revo-Fix can be used as an alternative method to CETSEAL. Available in two sizes.

    200x147_Waterstop-RX

    WATERSTOP RX
    An active, flexible strip concrete construction joint waterstop, WATERSTOP-RX provides a strong positive seal by expanding upon contact with water. Proven effective on projects worldwide for over 20 years, Waterstop-RX is designed for both continuous and intermittent hydrostatic conditions. WATERSTOP-RX is available in multiple configurations.
    READ MORE  PRODUCT SHEETS TECHNICAL DATA SHEETS

    200x147_Waterstop-XP

    WATERSTOP XP
    The next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP® XP is proven effective in a wide range of contaminated environments.
    READ MORE  PRODUCT SHEETS  TECHNICAL DATA SHEETS

    Case Studies

    300x220-HeliosEnergy

    HELIOS ENERGY RESEARCH FACILITY
    Berkeley, CA, USA
    From design development to construction, CETCO’s expertise in waterproofing was called upon to ensure that the basement, housing expensive laboratory equipment, remains dry at all times. CoreFlex’s composite system also saved the added labor of a two-membrane installation process. 
    DOWNLOAD FULL CASE STUDY

    300x220-MercyHospPlaza
    MERCY HOSPITAL PLAZA
    St. Louis, MO, USA
    To minimize building exposure, poor air quality, and odors, this occupied hospital utilized COREFLEX to waterproof the plaza deck prior to installing a GreenScapes vegetated roof system, hard-scape and water features. 
    DOWNLOAD FULL CASE STUDY

    300x220-PiperTech_ParkingGarage

    PIPER TECH PARKING DECK
    Los Angeles, CA, USA
    DOWNLOAD FULL CASE STUDY

    300x220-Shadyhills

    SHADY HILLS GYMNASIUM AND PARKING GARAGE
    Cambridge, MA, USA
    The original spec called for ULTRASEAL below slab with a layer of VOLTEX DS installed over it to provide protection from subsequent concrete operations. However, once the dewatering of the site began, it became apparent that there would be significantly more water at a greater flow rate. 
    DOWNLOAD FULL CASE STUDY

    300x220-WashingtonUniv_PlazaDeck

    WASHINGTON UNIV. SCHOOL OF MEDICINE PLAZA DECK RESTORATION
    St. Louis, MO, USA
    When it was decided that a courtyard would be implemented into the WUSM/BJC Medical complex, the design team understood that waterproofing and protecting the occupied space below during construction would be critical to the success of the project. 
    DOWNLOAD FULL CASE STUDY

    CETCO